Crew Access Arm Reaches for New and Heritage Technologies
Image above:A computer-aided design
image of the crew access arm that is
being developed for the Mobile Launcher
Photo Credit: NASA/Boeing
› View Larger Image
Orion will be the most advanced spacecraft ever designed and carry astronauts farther into space than ever before. SLS is designed to be flexible for launching spacecraft for crew and cargo missions and will enable new missions of exploration and expand human presence across the solar system. It will first launch Orion in 2017.
According to Kelli Maloney, a mechanical design engineer in the center’s Engineering Directorate, the mobile launcher's new 60-foot-long hydraulic arm will be similar in length and speed to the arm used during the Apollo missions. It will have two levels and incorporate hardware from NASA’s Apollo and Space Shuttle Programs.
Located at about the 270 feet high on the 355-foot-tall tower, the upper level will include a new “White Room” that provides access to the Orion crew module. The White Room will contain a six-foot-long access platform, also nicknamed the “diving board,” that will extend through Orion’s outer door to the crew module door. Refurbished Apollo era control console and accumulators also will be part of the new arm.
The lower-level walkway will provide access to two panels on the spacecraft's service module.
Maloney said design elements from the inflatable dock seal on the shuttle’s orbiter access arm will be reused, as well as storage cabinets and safety equipment from the shuttle-era White Room.
The access arm will rotate out to the crew module on giant Apollo-era hinges. The hinges will be refurbished and retrofitted with new digital encoders to accurately obtain the arm’s position.
“This information will be fed back to the Program Logic Controllers in an electrical room on the Mobile Launcher tower in order to achieve precise control of arm position,” Maloney said.
Platforms from Launch Pad 39B’s fixed service structure will be installed on the mobile launcher tower and provide access to the hinges for inspection and repair.
Image above:The mobile launcher made
the 4.2-mile trek along the crawler
way, Nov. 11, 2011, from Launch Pad
39B to the park site near the Vehicle
Assembly Building at NASA’s Kennedy
Space Center, after a two-week stay
on the pad for structural and
functional engineering tests.
Photo Credit: NASA file/2011
› View Larger Image
“It’s a challenge, because you have to think about every detail,” Maloney said. “It’s very diverse.”
During the process, heritage parts planned for reuse, such as Apollo-era control consoles, are scanned and then uploaded into a special 3-D design software program. Maloney said this process saves time and costs to modeling existing components.
“Having access to 3-D scanning capabilities is very helpful so that we can see how the design will fit into the existing structures, such as the mobile launcher, the Vehicle Assembly Building and Launch Pad 39B,” Maloney said.
Another innovation for the future is that the White Room can be removed and replaced on the upper level of the arm to accommodate access to larger, planned SLS cargo vehicles and future launch vehicles.
The design team, comprising NASA and Engineering Services Contract engineers, is working toward a 60 percent design review in January 2013. Design work on the crew access arm, as well as other access arms and umbilicals, will continue through 2013. Fabrication of the access arm could begin in 2014, with testing in the Launch Equipment Test Facility at Kennedy in 2015.
NASA's John F. Kennedy Space Center