10148 replies to this topic

[seeder]

zoser, on 20 February 2013 - 08:31 PM, said:

That's ancient alien tech for you.

Yeh of course it is, and its  a thousand years AFTER mans ancient tech

[bmk1245]

zoser, on 20 February 2013 - 08:16 PM, said:

Just to help demonstrate the point:
[...]
Just to clarify what I strongly believe that this means.

Softening stone = unknown technology = alien.

Pay attention to the points arrows are pointing at

[scowl]

zoser, on 20 February 2013 - 08:34 PM, said:

How would you explain the above marks other than advanced moulding methods?

We humans have done that with primitive wet carving. It's a slow and very labor-intensive process but so Is explaining things to you.

[zoser]

bmk1245, on 20 February 2013 - 08:36 PM, said:

Pay attention to the points arrows are pointing at

Apart from the foot that is someone's joke, the effect could well be the same.  This doesn't disprove anything.

The marks on the Cuzco wall had to be caused by something and there are at least 3 distinct types of effect:

1) Stamping
2) Scraping
3) Pointing.

So what caused these effects on the Cuzco wall?

They appear on virtually every block and look as though they are there to make good irregularities from stone bulging.

Edited by zoser, 20 February 2013 - 08:41 PM.

[bmk1245]

zoser, on 20 February 2013 - 08:20 PM, said:

Pyramid issue all proven.  Not stone age men.  Not tomb.  Advanced power generator.  The work of ancient aliens.

Anyone researching the issue particularly looking at the work of Dunn and supporting ideas from other contemporary researchers would naturally reach the same conclusion.

All bsMeters off the scale...

[Abramelin]

zoser, on 20 February 2013 - 08:31 PM, said:

That's ancient alien tech for you.

When was the last time you were in contact with an alien informing you about its technology?

[zoser]

scowl, on 20 February 2013 - 08:39 PM, said:

We humans have done that with primitive wet carving. It's a slow and very labor-intensive process but so Is explaining things to you.

No body goes to the trouble of producing a precision wall then to create marks like that in it.  It doesn't wash.

[bmk1245]

zoser, on 20 February 2013 - 08:40 PM, said:

Apart from the foot that is someone's joke, the effect could well be the same.  This doesn't disprove anything.

The marks on the Cuzco wall had to be caused by something and there are at least 3 distinct types of effect:

1) Stamping
2) Scraping
3) Pointing.

So what caused these effects on the Cuzco wall?

They appear on virtually every block and look as though they are there to make good irregularities from stone bulging.

Masonry, i.e. pounding the rock with the rock.

[zoser]

Abramelin, on 20 February 2013 - 08:42 PM, said:

When was the last time you were in contact with an alien informing you about its technology?

Their traces are clearly discernible.

Try and explain the three distinct types of marks if you would.

Nice avatar btw.

bmk1245, on 20 February 2013 - 08:43 PM, said:

Masonry, i.e. pounding the rock with the rock.

Why leave marks like that?

[DingoLingo]

zoser, on 20 February 2013 - 08:42 PM, said:

No body goes to the trouble of producing a precision wall then to create marks like that in it.  It doesn't wash.

just a quick question.. were you there when the wall was made?

[Abramelin]

zoser, on 20 February 2013 - 08:20 PM, said:

Pyramid issue all proven.  Not stone age men.  Not tomb.  Advanced power generator.  The work of ancient aliens.

Anyone researching the issue particularly looking at the work of Dunn and supporting ideas from other contemporary researchers would naturally reach the same conclusion.

Zoser, you said you had been an engineer.

Well, I have a brother who is head-engineer of an American company here in Holland, and he regularly travels to Russia, Sweden, Italy and so on for his work.

I showed/sent him this thread, and he just asked me this simple question, "Why do believe this man Zoser is an engineer?"

[zoser]

Why do some appear pointed and some not?

Could it be that some bulged out more than others?

Come on chaps think.

[zoser]

Abramelin, on 20 February 2013 - 08:46 PM, said:

Zoser, you said you had been an engineer.

Well, I have a brother who is head-engineer of an American company here in Holland, and he regularly travels to Russia, Sweden, Italy and so on for his work.

I showed/sent him this thread, and he just asked me this simple question, "Why do believe this man Zoser is an engineer?"

Come on Abe; your a clever chap.

Look at the pics and try and explain it any other way.

Edited by zoser, 20 February 2013 - 08:47 PM.

[seeder]

zoser, on 20 February 2013 - 08:47 PM, said:

Come on Abe; your a clever chap.

Look at the pics and try and explain it any other way.

No zoser, do not swerve when asked a direct question. Answer it.,

[Abramelin]

zoser, on 20 February 2013 - 08:44 PM, said:

Their traces are clearly discernible.

Try and explain the three distinct types of marks if you would.

Nice avatar btw.



Why leave marks like that?

No, I tried to ask you where you get the info from that the artefacts were made using alien technology. All you can say that you don't know how it was made, but not that aliens did it.

Meaning: you will have to compare it with known alien technology, and I doubt you can.

==

The avatar is based on an old book by Priestley.

I added the 2 raven banners on top.