Waspie_Dwarf Posted March 19, 2013 #1 Share Posted March 19, 2013 New 'Safe Mode' Status of Curiosity Expected to be Brief http://img854.imageshack.us/img854/6827/731375mainpia16763226x2.jpg Mission Status Report PASADENA, Calif. - NASA's Mars rover Curiosity is expected to resume science investigations in a few days, as engineers quickly diagnosed a software issue that prompted the rover to put itself into a precautionary standby status over the weekend. Curiosity initiated this automated fault-protection action, entering "safe mode" at about 8 p.m. PDT (11 p.m. EDT) on March 16, while operating on the B-side computer, one of its two main computers that are redundant to each other. It did not switch to the A-side computer, which was restored last week and is available as a back-up if needed. The rover is stable, healthy and in communication with engineers. The safe-mode entry was triggered when a command file failed a size-check by the rover's protective software. Engineers diagnosed a software bug that appended an unrelated file to the file being checked, causing the size mismatch. "This is a very straightforward matter to deal with," said the project manager for Curiosity, Richard Cook of NASA's Jet Propulsion Laboratory, Pasadena, Calif. "We can just delete that file, which we don't need any more, and we know how to keep this from occurring in the future." The mission's science observations have been on hold since a memory glitch on the A-side computer on Feb. 27, which prompted controllers to command a swap from the A-side computer to the B-side computer. That operator-commanded swap put Curiosity into safe mode for two days. The rover team restored the availability of the A-side as a backup and prepared the B-side to resume full operations. Cautiously bringing Curiosity out of safe mode status on the B-side is expected to take a couple of days. A four-week moratorium on sending commands to the rover will begin April 4 due to solar system geometry of Mars passing nearly directly behind the sun from Earth's perspective. The moratorium is a precaution against interference by the sun corrupting a command sent to the rover. NASA's Mars Science Laboratory project is using Curiosity and the rover's 10 science instruments to investigate environmental history within Gale Crater, a location where the project has found that conditions were long ago favorable for microbial life. JPL, a division of the California Institute of Technology in Pasadena, manages the project for NASA's Science Mission Directorate in Washington. More information about Curiosity is online at http://www.nasa.gov/msl and http://mars.jpl.nasa.gov/msl/ . You can follow the mission on Facebook at: http://www.facebook.com/marscuriosity and on Twitter at: http://www.twitter.com/marscuriosity . Guy Webster 818-354-6278 Jet Propulsion Laboratory, Pasadena, Calif. guy.webster@jpl.nasa.gov 2013-100 Source Link to comment Share on other sites More sharing options...
pallidin Posted March 19, 2013 #2 Share Posted March 19, 2013 Great update on the info regarding Curiousity. Thanks. Link to comment Share on other sites More sharing options...
DBunker Posted March 19, 2013 #3 Share Posted March 19, 2013 Could this cripple Curiosity, or even kill it? Link to comment Share on other sites More sharing options...
Waspie_Dwarf Posted March 19, 2013 Author #4 Share Posted March 19, 2013 Could this cripple Curiosity, or even kill it? From the very first line of the original post: NASA's Mars rover Curiosity is expected to resume science investigations in a few days, as engineers quickly diagnosed a software issue that prompted the rover to put itself into a precautionary standby status over the weekend. I would think that it is safe to assume the answer to your question is no. Link to comment Share on other sites More sharing options...
DBunker Posted March 19, 2013 #5 Share Posted March 19, 2013 (edited) Thank God for that.... We dont need another incident like we had last year, in the Fillmore district. Edited March 19, 2013 by DBunker Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now