Help - Search - Members - Calendar
Full Version: Revolution in energy production
Unexplained Mysteries Discussion Forums > News, Media & World Events > Conspiracies & Secret Societies
Sunofone
wheres the media? snake oil or suppression?
***************************************************
FOR IMMEDIATE RELEASE
March 30, 2005

The demonstration held at the National Press Club in Washington, D.C. on March 28, 2005 went as predicted.

The 100-lb Newman Energy Machine contained a 70-lb coil with a rotor that operated at HIGH RPMS with only MINUTE SPARKING as a result of the back-emf produced by the machine while it operates. The energy machine operated on a low voltage of only 30 volts consisting of five 6-volt batteries each comprised of four 1.5 volt battery units -- with a current equivalent to that of any one of those 1.5 volt battery units.

Such important technical developments enable mass production of this technology to go forward!

I also wish to speak about another subject to the good people who support my life's work for humanity:

During the news conference I had to physically remove an individual from the conference room who, along with his physicist cohort, had come to the news conference to heckle me and my work with no interest in understanding the importance of my energy machine technology.

I will now tell you why I did that. I am 68 years of age and I have experienced a LOT during the course of my life. When I saw the mannerisms of those two individuals towards my presentation and heard their sarcastically-toned "forked" tongues, I became enraged. I was enraged for all humanity and for all creative minds that have ever been subjected to such insensitive and uncaring attitudes.

For the past 40 years I have clearly seen that many so-called scientific intellectuals in high positions of influence are FRAUDS. Why? Because they have the mentality of a parrot. They have simply memorized the great contributions of important scientific innovators of the past and can quote those contributions like a parrot. Yet at the same time, they have absolutely no true understanding and especially curiosity regarding the subjects they quote.

I tried for years to get them to debate me and they always refused. They said the "burden of proof is on me."

I then put forth the absolute proof of a Unified Mechanical Field Theory, followed by the Energy Machine. But the mental cowards have still refused to debate me.

I do however give credit to more than 40 brave scientific individuals (physicists, electrical engineers, nuclear engineers, mechanical engineers, etc.) who did come forth and endorse the magnitude of my Mechanical Theory and the world importance for humanity resulting from the development of my Energy Machine.

There is now available a 30 minute VHS or DVD video done by the news media that proves all I have said and concludes with an unpublished song written and sung by John Denver about the importance of my life's work for humanity. I urge you to see that video for yourself. It may be ordered from JOSEPH NEWMAN PUBLISHING COMPANY, Order/Processing Dept., 3725 South Division Street, Grand Rapids, Michigan 49548for $10 plus $3 shipping/handling in the U.S. (overseas orders should add $3).

I have total contempt for the mental cowards and parrots in the scientific community whose attitudes impede the progress of civilization for all humanity. And I give deep love and thanks to the courage of John Denver and others who have helped the Energy Machine to go forward.

Sincerely,

Joseph W. Newman
*****************************************************************
This technology will provide access to virtually unlimited energy that is
abundant, inexpensive, and environmentally-friendly.

The Newman energy machine is an electromagnetic motor that runs
COOL (unlike ALL conventional motors) and harnesses the
elemental forces of the universe in complete accord
with the 1st Law of Thermodynamics.

The Newman energy machine will provide a stable and durable
alternative to oil, gas, coal, and nuclear sources.

This technology will power every automobile, home, appliance,
farm, factory, ship, and plane at a FRACTION of the present cost of energy.

A worldwide inexpensive energy source will have profound
geo-political implications for the Middle East.


http://www.josephnewman.com/
http://www.josephnewman.com/newman_book.html
Elvis
Is that the one that can output a larger amount energy than that which is input into it, which is rendered impossible by the accepted Laws of Physics?
If so, major breakthrough! thumbsup.gif
Sunofone
snake oil?
*****************************************************************
user posted image
The Lutec 1000 is the first free energy machine to be developed to commercial stage anywhere in the world.

The Lutec 1000 generator will produce up to 1000 watts of DC electricity twenty four hours a day, every day, which will be stored in a battery bank and then inverted to AC power and connected directly into the home or business.

The Lutec 1000 draws the power it requires to run itself from the same battery bank. The average house in Cairns, Queensland, uses only fourteen of the twenty four kilowatt hours able to be stored in twenty four hours by this method.

The batteries will last ten years. The generator is expected to come with a conditional ten year warranty.

The magnets that are responsible for the generation have an effective life of one thousand three hundred years.

This product is non polluting. It will assist to bring down green house gases and therefore help cure our sick and dying planet. There are strong community health benefits. It will help slow the rate of use of non renewable resources, like oil. It will help reduce airborne emissions of gases and elements that ruin our forests and lakes.

No buying petrol or diesel to run generators. No having to depend of the sun coming out, no flooding perfectly good farm land to build hydro systems, no nuclear meltdowns or disposal problems with radioactive by-products, no high sulphur and nitrous content, foul smelling, coal burning.

Buyers can structure their repayments so that the power produced pays for their purchase.

Convenience plus, no more black outs, brown outs, interruptions because of line maintenance, lightning strike, heavy rain, strong wind, fire, cyclone, flood, poor maintenance at power stations.

Add to all that better computer security, personal security, more heating, more disposable income, more cooling, more appliances purchased because it costs nothing to run them.

We have never said there is an “endless” source of energy emanating from magnets. We have said that the magnets we use in the Lutec 1000 are able to maintain their magnetic qualities for over twelve hundred years. That is a long time when gauged by human life expectancy, but is not forever. We welcome informed opinion, and to that end have sought out the highest qualified people in Australia and the United States of America to review our work.

The Lutec 1000 only baffles those who misinterpret the actions taking place within it as being outside common scientific principles and laws, where in fact it certainly is not. We will try to make a simple explanation to demonstrate what motivates the Lutec 1000 motor/generator:

Let’s say we hang a ten kilo weight off a permanent magnet butted to a steel roofing beam, and that the only thing holding the permanent magnet to the steel beam is the magnetism. Now let’s do the same thing, but this time with an electro-magnet which requires a constant electrical input to maintain its magnetic qualities.

Let’s say we leave them both there for ten years…

They will both perform the same task, that of holding the ten kilos off the floor. The electro-magnet, however, has needed to be fuelled by electricity provided by a generator of some kind - it could be hydro, nuclear, wind, solar, coal or oil - and has cost a large amount in terms of energy. Much work (in the scientific sense) has been done to provide the constant electric current necessary to maintain its magnetic hold on the steel girder.

Now take notice, the permanent magnet has not needed to be energised by an external source, it has done the job for “free” using only the magnetism it contains to perform the same job. The clue here is in the title of “permanent” magnet.

That same principle is one of the reasons the Lutec 1000 motor turns,
it is of course the spinning of the centre core of the motor which is caused by the permanent magnets being attracted and then repulsed from the steel cores of the fixed stator coils. It is this primary movement that allows the magnetic fields around the stator coils to be “cut” by the effect of the permanent magnets sweeping past the steel cores of the coils.

Note that we have achieved two effects from one cause, thus inducing an electric current per Mr Faraday’s theory, and so generating electricity as an output or product of the motors motion. The only electricity consumed has been that required to temporarily charge the coils and so creating a temporary magnet of like polarity to cause the permanent magnet to be repulsed rather than attracted.

There are a couple of other major factors that we won’t go into here, suffice it to say that our current prototype demonstrates 1500% more “out” than “in”...



For the technically-minded, the following formula is used to determine consumption of input power:

If the waveforms are periodic with constant rotational speed of the machine and constant mechanical load on the output, then a calculation of energy usage over one full rotational cycle should suffice. Along with all previous assumptions remaining valid, the formula then becomes:
user posted image
(where W(T) represents the nett energy usage in joules over one period T).

sorry...
http://www.lutec.com.au/
http://www.lutec.com.au/how.htm
http://www.lutec.com.au/patents.htm
aquatus1
Having a bit of trouble swallowing this. It says that the only energy consumed is the energy that is needed to "temporarily charge the coils and so creating a temporary magnet of like polarity to cause the permanent magnet to be repulsed rather than attracted.". Let's call that quantity X. X amount of energy is introduced into the machine to repulse the permanent magnet. Now, there will always be a certain amount of energy lost to the machine through resistance, unless we are dealing with superconductors which is not the case here. Let's call the energy loss due to resistance quantity A. There will also be a loss when the electrical energy is converted into magnetic energy in the coils, due to the limited efficiency when converted one form of energy to another (there is an actual, calculable, limit to the amount of energy that can be converted from one form to another). Let's call that quantity B. And now, there is also the amount of energy that will be required to overcome the initial inertia of the permanent magnet, energy which will not be made up as the magnet is repulsed and returns the energy back to the stator. Let's call that quantity C.

Theoretically, when something is pushed away, the most force that it can return is the exact same amount (X), as was used to push it away (equal and opposite, etc...). This falls apart in real life, though, because there are many other factors involved which also absorb some of that initial energy, such as resistance, limitation of energy conversion, and acceleration (change of inertia). Ultimately, it become (X-A-B-C), which cannot even equal the origal figure of X, much less surpass it. I was unable to find anything in this article that explained how it solved these three basic problems (There are others not so basic, but this is the stuff first year physics students would be familiar with).
turbonium
Newman Motor

He has based his ideas by showing how the First and Second Law of Thermodynamics are not universal in their applications. His theory linked below has a major basis in particle (atom) energy as the unharnessed potential for a greater energy output than the given input ....

Newman's website

Unified Mechanical Field Theory
(extracted points):

... the electric current that comes from a conventional battery. The electromagnetic energy coming from the battery is the energy that makes up the atoms of the material of the battery. Again, this energy use is not measurable by today’s measuring instruments. Electric meters of all types are simply mechanical devices that measure the amount of electric current that comes into that instrument. They do not measure the amount of mass that has been converted into electromagnetic energy.

Present technique in science states that the electric energy flowing from a battery is used up in the device operated by that flow of electric current. This is not true at all! The electromagnetic energy released from the atom makeup of a battery has a relatively infinite capacity to do obvious work, force, or power.

This is easily proven even with a small motor and a 1.5-volt battery. With a battery connected to the motor to operate it and with a meter to take readings, the motor is then physically stopped from turning by holding or restraining the shaft. At that moment the motor is performing no obvious work, force or power, but the meter will register a greater flow of current. The magnets of the motor can be taken out and the reading will be the same. If the electricity was being used to operate the motor, the meter would register more current when the motor was running.

aquatus1
QUOTE
This is easily proven even with a small motor and a 1.5-volt battery. With a battery connected to the motor to operate it and with a meter to take readings, the motor is then physically stopped from turning by holding or restraining the shaft. At that moment the motor is performing no obvious work, force or power, but the meter will register a greater flow of current. The magnets of the motor can be taken out and the reading will be the same. If the electricity was being used to operate the motor, the meter would register more current when the motor was running.


No obvious force or work? The motor is attempting to overcome the friction of whatever is holding down the rotor. Of course it isn't obvious, at least, not to anyone who hasn't had anything greater than a high school physics class, and technically, no, work is not being produced, however the energy is hardly unaccounted for. The motor will gradually get hotter and hotter until it burns itself out, as many people experienced with hobby motors have done on a fairly regular basis.

If these people are making this claim, I can only come to two conclusions: 1) They do not know enough about electricity and motors to provide an explanation that doesn't contradict what any RC hobbyist would know, which makes it unlikely they have created what they have created, or 2), they are relying on the general ignorance of these matters in the populace to advance their idea, in which case they are frauds.
Sunofone
thanks for the input A1 -whats your take on the lutec device?
aquatus1
The above quote is taken directly from the Lutec Site, and it matches, word-for-word, the write up on the Lutec machine, which I think was the purpose of Turbonium's post; to show that, if nothing else, the Lutec people are stealing another person's design. The little that they give in technical descriptions is not only not enough to indicate any new manner of electrical generation is taking place, it outright contradicts the working theories that are used everyday by physicist and electrical engineers. Since I already pointed out one technical problem, I went ahead and looked through the net using keywords "Lutec" and "Hoax". The following write up appeared, which explains in greater detail both the physical problems with the claims these people make, and also some irregularities they have committed, bringing some doubt into their credibility. The people writing this article are contributers to a skeptical magazine in the country, and are investigators with the Australian energy group offering the reward for such devices as these. Both are trained in physics and electrical engineering.

Investigation into Lutec, Inc.
Raistlin Majere
Revolution in energy production=ITER. If this fusion reactor, ITER, works, we'll have made a massive step in energy efficiency.
turbonium
aquatus is correct - don't invest any money with these guys. They have stolen other inventors ideas and jumbled them into their own VERY vague theory. I did a patent search for S. Africa (where they applied) and came up with nothing. Their patent application is just that - an application without approval and not even to the stage of a pending patent. That alone tells you that they have real problems backing up their claims.
Zeus
QUOTE
For the past 40 years I have clearly seen that many so-called scientific intellectuals in high positions of influence are FRAUDS. Why? Because they have the mentality of a parrot.


This must be the quote of the century, so funny an is also very true. thanks to big brother.


Can a device like this be made commercially if the scientific community all agree that it's a fraud?
aquatus1
Of course it can. Useless devices abound in the commercial world. You think those ion air cleaners do anything? Those ultrasonic insect repellers work?

Flim-flam has existed since the first caveman traded his magic club for that leg of mammoth. Con artists can cry about how unfair the establishment is, but ultimately, one does not become a scientist by parroting, but by research, and there is no global conspiracy among the scientific community to repress science (Really, what would be the point?). If a person claims to have something that works, then there is no reason to give explanations that do not reflect a working knowledge of the subject.
Tricia-Ann
"No buying petrol or diesel to run generators. No having to depend of the sun coming out, no flooding perfectly good farm land to build hydro systems, no nuclear meltdowns or disposal problems with radioactive by-products, no high sulphur and nitrous content, foul smelling, coal burning."

Well that says why the idea will get debunked or shelved-it'll do the global elite out of revenue!

How about power from water? Visit this website and see what you think about crop circles being the blueprint for water power.


http://imageevent.com/cropcirclerational/cropcirclesdecoded
Zeus
Wow, busy website..how much info can you cram on a single web page?


....Crop circle definition I heared once....Electromagnetic frequency modulators reactivating the old earth grid and the frequency of those living there from the semivisible dimensionalships disguised as clouds. i.e. softening the thick upper lip was a reason why England or Angle land was so bombarded. This messed up a lot of the power grabbing going on all over by the masonic idiots with their churches designed to collect energies from the attending public as well as the ley lines as they sit on leys which blocked the free flowing earth power and the freeness of mind. Hence the simple frequency circles had the relative effect of ET wiping out all the US missile installations without bombing . But hey, I read this from one of those websites ages ago so who knows the value of words these days especially 'Harmonic Convergence'.. But the main leys passing through the UK are the most significant in all of little Europe from Pagans to Royals have utilised the land far beyond that of Europe. Electromagnetic frequencies were (in the past as it is today) used to power feed humans with a current that is way beyond a food source. hence the prehistoric to present day magical rites to conjure up earth energies. Sorry way off topic.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2008 Invision Power Services, Inc.